All Cases
Enclave Flight 12U
• 104hp x 4
• Length: 22.625” / Width: 12.25” / Height: 10.25”
• Multiple Configurations
• Detachable stability leg that stores inside of case
• Solid Dovetail Construction – no screws to pull out
• Military Grade two part polyurethane elastomer coating inside and out; Fabric Free (No Tolex to Snag or tear)
• Chevron Black Polymer Corners
• 2 Make Noise Power Distribution Boards 1.4A per side
• Meets most Airplane carry on requirements; only 16 lbs
• Vector Rails with Sliding Nuts;
• 20 M2.5 nuts and screws per rail
• Carrying handle
• Two Switching power Bricks for use anywhere in the world
• 16lbs (7.26 kg)
Enclave Flight 6U
• 104hp x 2
• 2 5/8 Inches / 67mm interior Depth
• Solid Dovetail Construction – no screws to pull out
• Military Grade two part polyurethane elastomer coating
• Chevron Black Polymer Corners
• Back Rubber Feet
• Meets most Airplane carry on requirements; only 11 lbs
• Vector Rails with Sliding Nuts
• 20 M2.5 nuts per rail and 80 screws
• Carrying handle
• Built In Eye pads for carrying strap
• Make Noise Power Distribution Board
• Switching power Brick for use anywhere in the world
• Outputs: 1.4A +12V, 1A -12, 250mA +5V
Enclave Flight 3U
• 104hp
• 2 5/8 Inches / 67mm interior Depth
• Solid Dovetail Construction – no screws to pull out
• Military Grade two part polyurethane elastomer coating
• Chevron Black Polymer Corners
• Back Rubber Feet
• Meets most Airplane carry on requirements; only 7 lbs
• Vector Rails with Sliding Nuts
• 20 M2.5 nuts per rail and 40 screws
• Carrying handle
• Make Noise Mini-PWR
• Switching power wall wart for use anywhere in the world
• Outputs: 800mA +12V, 500mA -12, 250mA +5V
Studio 6 Modular System
• 104hp
• 5 3/4 Inches / 146mm interior Depth
• Solid Dovetail Construction – no screws to pull out
• Military Grade two part polyurethane elastomer coating
• Back Rubber Feet
• Vector Rails with Sliding Nuts
• 20 M2.5 nuts per rail and 80 screws
• Make Noise Power Distribution Board
• Switching power for use anywhere in the world
• Outputs: 1.4A +12V, 1A -12, 250mA +5V